• New
Cutter Creaser DC 746 Home Duplo International
  • Cutter Creaser DC 746 Home Duplo International
  • Cutter Creaser DC 746 Home Duplo International

Cutter Creaser DC 746

The DC-746 Slitter/Cutter/Creaser is a high-speed, automated finishing solution. With a speed of 50 sheets per minute, it efficiently handles large volume jobs with ease. This model can perform 6 slits, 30 cuts, and 20 creases in a single pass, with additional processes such as perforation and slit-scoring available through optional modules. It is capable of producing a wide range of products, including business cards, greeting cards, brochures, tickets, coupons, book covers, and more.

Model/Type Slitter/Cutter/Creaser DC-746
Document Size Width: 210-370mm
Length: 210-999.9mm
*Max: 710mm with the feed tray and the exit tray
Document type/weight 110-350g/m² (coated paper, high-quality paper, laminated paper, UV-coated paper)
* Within the above paper weight range including laminate and coat layer
*When using slitter module in slot 2 and/or slot 3: 127 gsm or more
Feeder tray capacity 150mm
*There is the load limitation for a document of over 670mm
Exit tray capacity 150mm
*Card stacker stacking height 90mm
Speed Approx. 50 ppm (sheets/minutes), (A4 SEF, 2 cuts and 1 crease)
*With registration mark on: approx. 40ppm. 3 steps adjustment
Processing accuracy ±0.2mm
Minimum finishing size Width 48mm Length 50mm
Maximum of Slit - Cut - Crease Up to 6 slits, up to 30 cuts, up to 20 creases (On 1 document)
Margin slit width 3.2 to 55 mm from the side edge
Margin gutter slit width 5-15mm
Number of registered job programs 250 jobs (Also PC via the PC controller)
Standard functions Test feed, Air knife, Side blow, Feed skew adjustment, Ultrasonic double feed detection, Reject(Documents available:670 mm or shorter), Automatic job setup by reading barcode, Image drift compensation by reading Registration mark, End mark detection, Apply shrinkage, Job lock, Batch separation(Not available when IFS connected), Emergency stop, Inter lock all covers, Paper ejection conveyor, Slitter guide, Speed adjustments(3 levels), Gutter unit(2 units), Cleaning mode, Interval mode, Longitudinal magnification correction function, Vertical and horizontal position correction function, PDF template creator.
Compatible OS for PC controller PC controller software (USB B type connector, PDF template creator)
・Windows 8.1 (32bit/64bit)
・Windows 10 (32bit/64bit)
・Windows 11
Power supply AC115V, 60Hz
AC230V, 50/60Hz
Power consumption      Consumption
     Current  Power
115V   5.2A    550W
230V   2.7A    550W

     Standby
     Current   Power
115V   1.0A    100W
230V   0.7A    110W
Machine Size In use (standard)
 2,645 (W) x 870 (D) x 1,115 (H) mm
In use (max document)
 3,040 (W) x 1,020 (D) x 1,115 (H) mm
When stored
 1,890 (W) x 870 (D) x 1,115 (H) mm
Weight 450kg
Optional equipment Rotary tool module, Cross tool module, Optional slitter module, Center slitter module, .
00648
New product

You might also like

Comments (0)