Loader baumannperfecta BB and BB-P
The loader or destacker is used for the automatic destacking of the layers. The loading system removes the layer directly from the pallet. Depending on the equipment of the loader, this can be done with pre-adjustable pile heights or with a chip system for exact destacking. The loader then lifts the layer to the required working level and after that automatically transfers them to the table of the jogger, the cutting machine or to other peripheral machines.
Loader baumannperfecta BB and BB-P
Loader BB
Fully automatic lifting and separating of reams - work in full benefit without physical strain on the operator.
The loaders enable the rational, automatic de-stacking of reams, which are then fed to the high-speed cutters. Paper, cardboard, foils and printing plates can be picked up lengthwise or crosswise and via various unstacking methods.
Rear-table loading
Baumann loaders typically load the high-speed cutter via the rear-table. The destacked reams are transported (standard version from the right side) towards the cutter either by a pushing unit "BTE" or by a gripper transport system "BFS".
Front-table loading
When front table loading is desired, the destacked ream is transported semi-automatically towards the cutter either by pusher or manually by the operator (standard version from the right side).
Advantages
- Very high automation level
- All relevant parameters can be adjusted to suit the product from the operator's panel
- Solid and precise construction
- Automatic destacking of small formats is possible
- Universal application
Loader BB-P - Precision
Additional features compared to standard loader
- Pile height 1800 mm
- Including de-stacking system and ream relieving
Options BB and BB-P
- Reflective light barrier with separating wedges
- Pile height 1800 mm (only BB)
- Destacking by chips
- Processing of two-ups
- Pusher system in gripper arm or separate
- Safety devices
- Maintenance bolt to secure the table in upper end position
Options BB-P
- Loader prepared for calculating the number of sheets
Technical Data
| BB 3 |
BB 5
|
BB 7
|
|||
| Format [mm] | 770 x 1070 |
920 x 1300
|
1250 x 1650
|
||
| Max. ream weight [kg] | 150 |
150
|
300 | ||
| Ream Height [mm] | 160 |
160
|
160
|
||
|
Pile height [mm]
|
1400 |
1400
|
1400
|
||
|
Pile height optional [mm]
|
1800 | 1800 | 1800 |
| BB 3-P |
BB 7-P
|
||||
| Format [mm] | 770 x 1070 |
1250 x 1650
|
|||
| Max. ream weight [kg] | 150 | 300 | |||
| Ream Height [mm] | 160 |
160
|
|||
|
Pile height [mm]
|
1800 |
1800
|
00416
13 other products in the same category:
The loader or destacker is used for the automatic destacking of the layers. The loading system removes the layer directly from the pallet. Depending on the equipment of the loader, this can be done with pre-adjustable pile heights or with a chip system for exact destacking. The loader then lifts the layer to the required working level and after that automatically transfers them to the table of the jogger, the cutting machine or to other peripheral machines.