Baumann BB

Automatic destacking of reams and automatic transport towards the high-speed cutter.

Rear-table loading

Baumann Loaders typically load the high-speed cutter via the rear-table. The destacked reams are transported towards the cutter either by a pushing unit "BTE" or by a gripper transport system "BFS".

Front-table loading

When front table loading is desired, the destacked ream is transported semi-automatically towards the cutter either by pusher or manually by the operator.

Features

• Possible destacking systems
• Reflective wedge (destacking exactly the pre-defined ream)
• Long separating strips (E-System, destacking exactly the pre-defined ream)
• Short separating strips (destacking exactly the pre-defined ream)
• Light-barrier, which is adjusted to the requested ream height (destacking roughly the requested ream, destacking of exactly the pre-defined ream is not possible)
• Installation
• Longitudinal installation (the loader takes up the ream at its smaller side)
• Installation at an right angle (the loader takes up the ream at its larger side)

Loaders for formats 8 and 10 are constructed with a double-support.

Options

• Double gripper for larger formats
• Maximum pile height 1800 mm or 2100 mm
• Calculation of the optimum ream height with respect to the given pile height

Application

• Paper
• Plastic
• Chipboard or heavy cardboard
• Printing Plates

Advantages

• Very high automation level
• All relevant parameters can be adjusted to suit the product from the operator’s panel
• Solid and precise construction
• Automatic destacking of small formats is possible
• Universal application

Technical Data