2014 Iecho digital cutting table BK2516

Cutting System Introduction 1.1System Components

BK cutting system includes electrical control box, cutting main body, pump, air compressor and other accessory parts.

Software includes data processing software and cutting system control software.

According to customer's requirements, we will configure the following one tool or several tools: tangential knife, oscillating knife, driven rotary knife, V-cut, creasing wheel, punching knife and CNC router.

1.2 Operating Principle

Deal with the patterns (dxf or plt formats) for outline analyzing, automatic marking, cutting tool and types definition with SmartCut software, the file after disposal can be conveyed to the machine automatically, the control center can finish the outline track, knife rotation, knife lifting off , according to the data, control system will operate fastly and generate motion control signal, then finish cutting path, rotating knife, lift off knife and other motion control actions with servo motor, to achieve fast and accurate cutting automatically.

1.3 Technical Parameters

Hangzhou IECHO Science Technology Co. Ltd

BK Manual ·4·

2 Security Considerations

1. Power supply must be connected to the earth.

2. Because of the big power of the cutter, the plug must be up to the diameter requirement,

3. Before turn on the power, check if there is anything on the strip or guide.
4. Please turn off the power if there are abnormal situation.
5. The installation site of cutting bed should be appropriate. The operator should

keep a safe distance from the machine when the machine is running.
6. When inspect and maintain the equipment, please be sure to disconnect the

power supply, prohibit to charge plug cable or connect operations.
7. If need to inspect, debug cutting head or replace tools when in an energized state