• New
JETVARNISH 3D One  Konica Minolta Home
  • JETVARNISH 3D One  Konica Minolta Home
  • JETVARNISH 3D One  Konica Minolta Home

JETVARNISH 3D One Konica Minolta

Printing technology

MGI’s exclusive inkjet engine technology; Drop-on-Demand (DoD) technology; Piezoelectric printheads,developed and manufactured by Konica Minolta; Single pass printing; Flexible & scalable printing architecture

Coating thicknesses

On laminated and aqueous coating: 21 µm – 116 µm for 3D raised effects and tactile finish.

On toner and coated paper: 30 μm – 116 µm for 3D raised effects and a tactile finish

Production speed

In 2D/flat mode: Up to 2,077 A3 sheets per hour (with 21 µm)

In 3D/raised mode: Up to 1,260 A3 sheets per hour (with 51 µm)
Up to 547 A3 sheets per hour (with 116 micron)

Registration

SmartScanner coupled with Artificial Intelligence (AIS) for fully real-time  automated sheet-to-sheet registration process. No crop marks required.

Formats

Min. 21 x 29.7 cm
Max. 36.4 x 75.0 cm
Max. Printable Width 35.3 cm

Substrate thickness

Min: 135 g/m2 and not less than 150 μm or 6 mil before printing
& lamination; Max: 450 g/m2 and not more than 450 μm or
18 mil before printing & lamination; Motorized height-adjustment print heads

Substrates*

Printing on most matte or glossy laminated surfaces, with or without aqueous coating, layered paper, plastic, PVC and other coated materials.

Varnish on toner

Spot 3D One coat directly onto most digital prints with no
lamination or coating required.

UV coatings and capacity

varnish delivered with a 10-litre tank capacity

High capacity
Automatic feeder

Feeder able to handle a paper pile up to 30 cm;
2,500 sheets at 135 g/m2

Paper Tray

Tray able to handle a paper pile up to 15 cm or approximately
1,250 sheets at 135 g/m2

All paper formats from A4 up to 36.4 x 75 cm

Paper path

100% flat paper path; Vacuum feed system; Air feed system; Automatic double sheet detection; In-line LED dryer; On-the-fly drying & curing via integrated LED

Add-ons

AIS SmartScanner Lighting for metallized substrates

Dimensions (L x W x H)

4.02** x 1.41 x 1.80 meter; 1 meter clearance required on all 4 sides

Weight

± 1,200 kg

Electrical
requirements

V: 220-240V 50-60Hz; A: 20; plug: 2 plugs CEE 17 IP44 32A (32A 250V, 1P+N+PE); RCD 30mA; C curve 32A breaker

Operating

Temperature: 18 to 30°C
Environment Relative humidity: between 30 – 55% (no condensation)

Respecting the
environment

Eliminates resource waste (wasted electricity, paper and varnish); No plates (offset) or screens (screen printing); No cleanup or preparation between jobs; Drastic reduction in amount of consumables and use of bulk packaging; Coating without volatile solvent.

00691
Comments (0)